Plastic bottle mould
The production process of plastic bottles cannot be done without molds, and the shape of the mold determines the shape of the produced bottle, so the types of molds are very diverse.Contact Us
Not the same. These two materials have different processing processes, different mold construction, and different production machines/blowing machines.
2、Is the mold for blow molding and injection molding the same?
It is not the same. These are two completely different processes, with different mold construction and corresponding processing machines.Contact Us
3、What material is the mold made of?
It depends on what products are made of the mold, our factory opened the mold, squeeze blowing bottle mold default is No. 50 steel, also known as Wang material, higher requirements can be used S136H. injection pull blowing bottle mold default is S136H stainless steel.
Also use aluminum to do the mold, cooling effect is better, but the mold hardness is not long enough life, mold line, easy to touch a touch bad, resulting in the blow molding products are not beautiful enough.
4、Can the mold be engraved with words or patterns?
Can be, there is a good film etching to the mold, the terminology called “sun pattern” or “sun word”; there is a direct engraving machine carved in the mold, depending on the size and depth of the logo.
5、What do I need from customers to open plastic bottles?
It is better to have a physical sample or 3D drawing. If there is no physical and 3D drawing, it is fine to have a graphic design or sketch, and then draw 3D drawing to the customer for confirmation according to the graphic design or sketch.Contact Us